Specifications:

Paper tube length range: 600mm -- unlimited length

Paper tube thickness range: 2mm -- 18mm

Diameter range of paper tube: ? 100mm - ? 300mm

Maximum winding speed: 12m/min

Gluing method: single side gluing, double side gluing (optional)

Operating voltage: 380V 50HZ

Maximum power: 15KW

Number of pipe reels: 2

Cutting system: professional chasing shear servo system, oil pressure system (optional)

used：

It is specially used for the production of large twill (threaded) paper tubes

Features：

● Paper loading mode: equipped with independent paper loading rack, each rack can be hung with multiple paper rolls, and the number of paper racks can be increased or decreased at will according to the change of coil thickness. Linear feeding, low resistance, avoid paper breakage as far as possible.

● Gluing method: two gluing methods are available: single side gluing and double side gluing. Both are automatic glue applicators, which are equipped with independent automatic waxing machines to wax the backing paper, greatly reducing the friction between the backing paper and the reel shaft, and making the reel more smooth. The waxing machine is electrically heated and the temperature can be automatically controlled.

● Pipe rolling method: two machine heads are used for pipe rolling, which is driven by a special high-strength gearbox. The gearbox is connected with the motor by a reducer, and the pipe rolling power is strong. The tightness of the winding pipe belt is adjusted by the hydraulic system and can be controlled on the console, which is very convenient. The whole reeling system runs smoothly, the reeling force is large, and the paper tube quality is guaranteed.

● Driving mode: high-power AC motor, vector frequency converter control, stepless speed regulation; The vector AC variable-frequency motor has the characteristics of stable power output and constant torque during high-speed and low-speed operation, so as to avoid the phenomenon that the machine will crash due to slow speed.

● Cutting mode: The cutting machine is driven by a professional chasing shear servo system or oil pressure system, with accurate cutting length positioning, fast response and excellent synchronization performance. Alloy round cutter can be used for cutting. The cutter is driven by an independent motor, with thorough cutting and flat end face.

● Control mode: all control keys are concentrated on an independent movable console, which is easy to control. Microcomputer programming control, high degree of automation.